VE500RQ

VGA/Audio/RS-232 Cat 5 Receiver with Auto Deskew (1280 x 1024@300m)

VE500R

VGA/Audio/RS-232 Cat 5 Receiver with Auto Compensation (1280 x 1024@200m)

VE500T

VGA/Audio/RS-232 Cat 5 Transmitter with Auto Compensation (1280 x 1024@300m (RQ))

VGA/Audio/RS-232 Cat 5 Repeater with Dual Output (1600 x 1200@150m)

Discontinued Suggested Replacement Model
VB552

Uses Cat 5e cable to extend audio/video signal
Extends the transmission range an extra 150m
High-quality video - up to 1920x1200@60Hz at 30m, 1600x1200@60Hz at 150m, 1280x1024@60Hz at 200m
Audio and serial enabled

MSRP: Quote Upon Request

The VB552 VGA Over Cat 5 Repeater +Audio is an audio/video signal extension device which is compatible with ATEN Cat 5 Audio/Video splitters. The VB552 extends the audio/video transmission range an extra 500 feet (150m) over Cat 5e (or higher) cables. The use of an additional repeater means the audio/video signals can be transmitted over even longer distances, up to 1470 feet (450m).

Furthermore, for longer distance installations where video signals may degrade, the VB552 has adjustable video gain and compensation controls to provide the sharpest video quality possible. An IR remote control also provides picture control at the remote site.
Rack-mountable, with two RS-232 channels on the unit for selection, and support for high video resolutions, the VB552 is the perfect solution to extend the range of your A/V and serial transmissions in any installation environment requiring VESA FDMI mount standards.

Package Contents

1x VB552 VGA Over Cat 5 Repeater + Audio
1x Power Adapter
1x Infrared Remote Control Handset
1x Infrared Receiver
1x IR Receiver Holder
1x Rack Mount Kit
1x User Guide

Uses Cat 5e cable to extend audio/video signal
Extends the transmission range an extra 150m
High-quality video - up to 1920x1200@60Hz at 100 feet (30m), 1600x1200@60Hz at 500 feet (150m), 1280x1024@60Hz at 650 feet (200m)
Audio and serial enabled
Two gain control modes for sharpest picture quality
Video gain and compensation adjustable via OSD
IR receiver for quick and easy video quality adjustment
IR remote control for screen on/off and video adjustment at remote site
Provides two RS-232 channels for selection
Follows VESA FDMI mount standard
Supports DDC for the local monitor
Supports VGA, SVGA, XGA, SXGA, UXGA and multisync monitors
For use in combination with VS1504/VS1508 Audio/ Video splitter

Video Output
Interfaces	2 x HDB-15 Female (Blue)
Impedance	75 Ω
Max. Distance	1.8 m
Video
Max. Bandwidth	300 MHz
Max. Resolutions / Distance	Up to 1920 x 1200@60Hz@30m; 1600 x 1200@60Hz@150m
Audio Outputs
Interfaces	2 x Mini Stereo Jack Female (Green)
Control
RS-232	Connector: 2 x DB-9 Male (Black)
Connectors
Power	1 x DC Jack (Black)
Power Consumption	DC5.3V:4.92W:23BTU/h Note: ● The measurement in Watts indicates the typical power consumption of the device with no external loading. ● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Environmental
Operating Temperature	0 - 50°C
Storage Temperature	-20 - 60°C
Humidity	0 - 80% RH, Non-Condensing
Physical Properties
Housing	Metal
Weight	0.35 kg ( 0.77 lb )
Dimensions (L x W x H)	13.90 x 8.80 x 2.86 cm (5.47 x 3.46 x 1.13 in.)
Carton Lot	5 pcs
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.